| C1 |
CHASSIS |
| c11 |
Steel chassis including suspension and engine brackets, steel front
bulkhead and footwell panels, rear bulkhead, steel
transmission tunnel sides, rear wing supports, rear
suspension side panels. |
| c12 |
Steel
chassis as above, powder painted |
| |
|
| C2 |
ORIGINAL
ESTFIELD CHASSIS COMPONENTS |
| C21 |
Front axle |
| c211 |
Upper wishbones to accept
Ford transit track rod end (joint not included) |
| c212 |
Lower wishbones to accept
Lada lower ball joint (ball-joint not included) |
| c213 |
Front shock absorber (Max = 360mm, Min
= 260mm Sachs hydropneumatic, Part No.110 713) and spring
(length =180mm; inner Dia 50mm; rate 100kg / 10mm)
including spring collars with preload adjustment. |
| c215 |
Set of 8 poly bushes for front axle |
| C22 |
Rear axle |
| c221 |
Set of 4 trailing arms |
| c222 |
Panhard rod |
| c223 |
Rear axle brackets (for
welding to Lada axle tube). |
| c224 |
Rear shock absorber ( Max = 330mm, Min
= 235mm Sachs hydropneumatic, Part No.110 807) and spring
(length =180mm; inner Dia 50mm; rate 100kg / 10mm)
including spring collars with preload adjustment. |
| c227 |
Set of 10 poly bushes for rear axle |
| C3 |
NEW,
RECONDITIONED AND EXCHANGE DONOR MECHANICAL COMPONENTS |
| C31 |
Front axle |
| c311 |
Recon. modified Lada forged front upright
R/H. Top hole taper drilled to fit Ford Transit track rod
end, bottom hole taper to fit Lada lower ball-joint. |
| c312 |
Recon. modified Lada
forged front upright L/H. Top hole taper drilled to fit
Ford Transit track rod end, bottom hole taper to fit Lada
lower ball-joint. |
| c313 |
Recon. Lada front hub (incl. new bearings):
98mm PCD, also suits some Fiat & Lancia wheels |
| c314 |
Shortened
forged Lada steering arm - length and track-rod
compatibility to customer spec. |
| c315 |
Lada lower ball-joint |
| c316 |
Ford Transit track rod end |
| c317 |
Set of 8 Lada metallastic bushes for
front suspension wishbones |
| C32 |
Rear axle |
| c321 |
Exchange
recon. Lada rear axle tube with ESTfield axle brackets
attached (painted) |
| c322 |
S/h Lada
rear axle complete as is, with brake components,
half-shafts, differential (4.2 or 4.0). ESTfield axle
brackets are attached and the axle tube and back-plate
are cleaned and painted. |
| c323 |
New Lada rear axle
complete with brake components, half-shafts, differential
(4.2 or 4.0) and ESTfield axle brackets attached
(painted) |
| c324 |
Set of 10 metallastic bushes for rear
suspension |
| C4 |
BRAKING
SYSTEM COMPONENTS |
| C41 |
General brake and clutch
system |
| c411 |
Modified recon. Lada pedal-box |
| c412 |
New Lada brake master cylinder
(non-servo) |
| c413 |
New Lada brake master cylinder (servo) |
| c414 |
New Lada clutch master cylinder |
| C42 |
Front axle |
| c421 |
Recon. lada caliper fixing plate |
| c423 |
New Lada brake caliper including pads
and pins |
| c424 |
New Lada brake disc |
| C43 |
Rear axle |
| c431 |
Recon. Lada brake backplate |
| c432 |
New Lada brake cylinder |
| c433 |
Set of new brake linings (both wheels) |
| c434 |
New Lada brake drum |
| c435 |
Recon. Lada handbrake with new cables |
| B1 |
BODY PANELS |
| B11 |
GRP body panels |
| b111 |
Front cycle wings |
| b112 |
Rear wings |
| b113 |
Nose cone |
| b114 |
Scuttle |
| b115 |
Priming and painting of above 6 piece set |
| b116 |
"new"
GRP bonnet (hood) |
| b117 |
"new"
GRP rear panel |
| B12 |
1 mm aluminium alloy body
panels |
| b121 |
Bonnet |
| b122 |
Side panels - set of 4 |
| b123 |
Rear panel |
| b124 |
Floorset (marine ply+
aluminium) |
| |
|
| A1 |
ADDITIONAL
COMPONENTS AND ACCESSORIES |
| a11 |
S/s Roll hoop (additional supports 100
Euro each) |
| a12 |
4mm aluminium dash with holes for 5
gauges |
| a13 |
S/s 39l fuel tank (aluminium tank + 95
Euro) |
| a14 |
Front wing bracket |
| a15 |
S/s grille |
| a16 |
GRP formula seats |
| a17 |
SPARCO sport off road |
| a18 |
Cast aluminium aeroscreen with E
marked glass |